SINGLE CRYSTAL ZIRCONIA GROG

TYPE ZOG

Features

  • High Purity ZrO2 Single Crystal (99%+)
  • High Temperature Stability to 2400 °C
  • Low Thermal Conductivity
  • Two Particle Size Ranges are Offered
  • Excellent Thermal Shock Resistance
  • No Outgassing
  • Virtually Dust Free Performance
  • Available 'Off the Shelf'

Zircar Zirconia Single Crystal Grog Type ZOG is composed of small (0.6 to 2.4mm) single crystals of zirconia having a monoclinic structure. These "skull melted" crystallites exhibit virtually no particle breakdown during thermal cycling and provide dust-free performance. Type ZOG is useful at temperatures up to 2400°C under oxidizing conditions with no sintering or particle breakdown and minimal sticking.

Zircar Zirconia Single Crystal Grog Type ZOG was developed for RF (Radio Frequency) induction furnaces operating above 2000°C. These furnaces are typically used in fiber optic draw towers and crystal growing applications where high purity, low electrical conductivity and dust-free performance at extreme temperatures are essential. Zirconia Single Crystal Grog Type ZOG is free flowing, therefore conforming to irregular configurations to fill small and intricate areas.

Type ZOG contains no organic binders and will produce no smoke or odor when heated and is available in two particle size ranges.

  • Type ZOG-1 has a Tyler mesh size of -8 to +20 (2.4 mm to 0.85 mm)
  • Type ZOG-2 has a Tyler mesh size of -10 to +28 (1.7 mm to 0.6 mm)

APPLICATION INFORMATION

  • ZOG Grog is used as insulation and crucible support in crystal growing furnaces.
  • ZOG Grog is used as insulation for glass melting and fiber optic draw furnaces.
  • ZOG Grog is used as bulk fill insulation.
  • ZOG Grog is used as ultra high temperature insulation for advanced energy systems.

Properties & Characteristics

Composition, Wt%
ZrO2 * 99+
SiO2 0.15
TiO2 0.15
Melting Point, °C (°F) 2715 (4919)
Maximum Use Temperature**, °C (°F) 2400 (4352)
Bulk Density, g/cc (pcf) 2.75 (170)
Outgassing Nil
% Shrinkage, 1/2 hour at 2400°C (4352°F) 0

* 1 - 2 wt% hafnia occurs naturally with zirconia and does not affect performance.

** Maximum use temperature is dependent on variables such as stresses, both thermal and chemical, and the chemical environment that the material experiences.

Ordering Information

Zirconia Grog Type ZOG is sold in a two standard weight packages, which are listed along with their item number in the table below.

Standard Sizes Item Number
ZOG-1, -8 to +20 Tyler, 1 pound BF001
ZOG-1, -8 to +20 Tyler, 10 pounds BF002
ZOG-2, -10 to +28 Tyler, 1 pound BG001
ZOG-2, -10 to +28 Tyler, 10 pounds BG002

StartHere

If you are interested in getting a custom machined part please fill out the form below. One of our team will contact you soon.

I am interested in: